Plasma Spray

Thermal spraying techniques are coating processes in which melted (or heated) materials are sprayed onto a surface. The "feedstock" (coating precursor) is heated by electrical (plasma or arc) or chemical means (combustion flame).


Thermal spraying can provide thick coatings (approx. thickness range is 20 micrometers to several mm, depending on the process and feedstock), over a large area at high deposition rate as compared to other coating processes such as electroplating, physical and chemical vapor deposition. Coating materials available for thermal spraying include metals, alloys, ceramics, plastics and composites. They are fed in powder or wire form, heated to a molten or semimolten state and accelerated towards substrates in the form of micrometer-size particles. Combustion or electrical arc discharge is usually used as the source of energy for thermal spraying. Resulting coatings are made by the accumulation of numerous sprayed particles. The surface may not heat up significantly, allowing the coating of flammable substances.


Coating quality is usually assessed by measuring its porosity, oxide content, macro and micro-hardness, bond strength and surface roughness. Generally, the coating quality increases with increasing particle velocities.


Several variations of thermal spraying are distinguished:


Plasma spraying

Detonation spraying

Wire arc spraying

Flame spraying

High velocity oxy-fuel coating spraying (HVOF)

High velocity air fuel (HVAF)

Warm spraying

Cold spraying

Welcome to our website. If you have any requests or suggestions,please feel free to email us at sales@china-artech.com or use the following enquiry form. Please allow us to provide you with the best service.